Tuesday 20 March 2018 photo 3/45
|
Cressington sputter coater manual: >> http://wxw.cloudz.pw/download?file=cressington+sputter+coater+manual << (Download)
Cressington sputter coater manual: >> http://wxw.cloudz.pw/read?file=cressington+sputter+coater+manual << (Read Online)
OPERATING THE CRESSINGTON 208 HR SPUTTER COATER (FOR SEM). 1. Lift the top plate of the sputter chamber and place the sample on the base plate Switch on the sputter coater (1). 4. Open argon gas supply (tap on the bench; do not change the regulator). 5. The unit will start up in auto. Switch to manual (2). 6.
OPERATION of SPUTTER COATER Cressington 108 AUTO. 1. Place the specimen in the chamber and adjust height (we recommend about 1.5 inch or 4 cm) from the target to the surface of the sample. 2. Close the lid carefully. 3. Press the RED BUTTON on the power strip next to the pump. The pumping starts. If you hear
The Sputter Coater 108 auto offers the choice of manual or automated operation. The specifications also include automatic vent (with a choice of vent gas) and argon purge control. In automatic mode, the coater can be controlled in two ways. First, the digital timer can be used to give repeatable coatings or the Film
Sputter supply: Microprocessor based, safety interlock, variable, 40mA maximum. Sputter head: Low voltage "ultra-cool" planar magnetron. Quick target change. Wrap-around dark-space shield. Analog metering: Vacuum Atm - 0.001mb. Thickness monitoring: Model MTM-10 (optional). Control method: Manual gas and
Cressington Coaters Overview The 108 Manual Sputter Coater is an ideal system for sample coating with Au of non-conducting samples for standard SEM or tabletop SEM imaging. The economical desktop unit is simple to operate, offers rapid pumpdown times, fine grain coatings and negligible sample heating.
The Cressington 108auto sputter coater offers the choice of manual or automatic operation. The specification also includes a vent gas inlet and argon purge control. Picture of 108 sputter head In automatic mode the coater can be controlled in two ways. The digital timer can be used to give repeatable coatings or the
Operating Manual. Cressington 108auto. Automatic Sputter Coater for standard SEM/EDX applications. Cressington Scientific Instruments Ltd. 34 Chalk Hill Watford WD1 4BX UK. Tel: (0)1923 220499 Fax: (0)1923 816646. Revision 3, October 2001
COLUMBIA NANO INITIATIVE / CENTER FOR INTEGRATED SCIENCE AND ENGINEERING. CNI Shared Facilities. Cressington 108 Manual Sputter. Coater. Standard Operating Procedure. These instructions are intended for reference only, and will not replace the thorough training required for proper system operation.
Cressington 208 HR Sputter coater. 08/18/06 mgbersch. Overview. 08/18/06 mgbersch. Argon On. Check to see if the Argon tank (bottle) main valve is on. Do NOT turn the pressure adjust needle valve on the regulator. 08/18/06 mgbersch. Argon On Number 2. Normally the specimen chamber is left under vacuum. Open the
The 108 Manual Sputter Coater is an ideal system for sample coating with Au of non-conducting samples for standard SEM imaging. The system is simple to operate, offers rapid pumpdown times, fine grain coatings and negligible sample heating. The safety interlocked sputtering supply is fully variable and the sputter
Annons