read?file=owens+corning+shingle+installation+instructions << (Read Online)

16 Feb 2012
Introducing Starter Shingle Roll from Owens Corning, the largest manufacturer of world-class roofing materials. place, you're ready to begin shingling. (See application instructions on back.) The Starter Shingle Roll advantages: • Eliminates time-consuming tab cutting or shingle flopping. • Comes in handy individual rolls,

Roofer's Guide to Roof Installation. The purpose of this guide is to provide you with quality instructions and detailed procedures on roof application and product installations following the Asphalt Roofing. Manufacturers Association (ARMA) guidelines. This guide is part of Owens Corning Roofing's Quality Assurance Initiative
cialty eaves flashing product, follow the manufacturer's instructions. Installation. Instructions Oakridge PROTM Series. Laminate Shingles. These laminated shingles are designed for new or reroofing work over any properly built and supported wood roof deck having ade- quate nail holding capacity and a smooth surface.
Complete shingle application on roof deck before applying hip the recommended application instructions and the following Owens Corning™ recommends that fasteners comply with. ASTM F 1667. Check local building codes. All fasteners must penetrate at least ? " into the wood deck or completely through plywood or
6 Jun 2013
21 inches per foot, use six fasteners and two spots of asphalt plastic cement per tab. All six fasteners must be spaced equally. Place two spots of asphalt plastic cement, 1" in diameter, under each shingle tab immediately upon installation. of 110° F. Protect shingles from weather when stored at the job site.
11 Apr 2012
REQUIRED: For slopes exceeding 60 degrees or 21 inches per foot, use six fasteners and four spots of asphalt roof cement per shingle. Apply immediately; one 1" diameter spot of asphalt roof cement under each shingle tab. Center asphalt roof cement 2" up from bottom edge of shingle tab.

Annons

The photo has no tags

March 2018