January
Thursday 7 December 2017 photo 7/15
|
St-4 type autoguider interface design: >> http://kgv.cloudz.pw/download?file=st-4+type+autoguider+interface+design << (Download)
St-4 type autoguider interface design: >> http://kgv.cloudz.pw/read?file=st-4+type+autoguider+interface+design << (Read Online)
st4 autoguider port pinout
st4 cable
usb-st4 interface
arduino st4
st-4 autoguider port
st-4 autoguider
st4 autoguider cable
st4 guiding
19 Feb 2015 Telescope GOTO and autoguiding through ST-4 with an arduino. Basically, you need to build the USB-ST4 interface described in the github project page and modify your control pad like explained here if it doesn't have an ST4 port. Modifying the control pad means soldering and wiring an RJ12 socket to
28 Aug 2014 I got a new QHY5LiiC recently, and was experimenting with guiding via ST-4 (ie 'on-camera' in PHD, with the ST-4 cable straight from the camera to the autoguider port on the mount) versus the Ascom driver connection I usually do (USB on laptop via RS232-USB interface, plugged in to the synscan
manufacturer) use for this function. However, most mounts do use a de-facto standard that for lack of a better name is referred to as ST-4. This refers to a popular model of autoguider from Santa Barbara. Instrument Group (SBIG), the ST-4. ST-4 interfaces use a modular-style connector and jack similar to telephone cabling,
If you look at the manual of the SBIG STV, this is the next self contained autoguider after the ST-4, it says the plug on the chassis is pinned out like this: . When I first designed Shoestring's GPINT-PT and GPUSB products, I had to pick what I thought was the most widely used method to interface to mounts.
Add an ST-4 output port to your computer for autoguiding your ST-4 capable telescope. Supported by ASCOM 'telescope' driver using 'PulseGuide'. PIC based (18F2550) for USB as CDC interface (USB-serial port). Bootloader capable for upgrades in the field (SW2 controlled). Mac OSX Leopard support in PHD Guiding
17 Jun 2017 ST4 guiding refers in part by the type of cable used in most cases and connects to the guide port on the mount from the camera. Usually I believe ASCOM guiding is a pulse type of guiding and will interface with usb and network ports, probably serial also since it's the oldest and mount still come with them.
16 Jan 2009 If you look at the manual of the SBIG STV, this is the next self contained autoguider after the ST-4, it says the plug on the chassis is pinned out like this: . That doesn't matter; we know just how the guide port is configured so we know how to make the interface cable from the guider to the mount if we know
and be trapped at the back of the CCD. System Interfaces. The following equipment is a prerequisite to running the ST-4 CCD Star Tracker / Imaging. Camera. 1. A Telescope with For pushbutton type controllers the ST-4 tracker controls the telescope . of German Equatorial design and the telescope tube flips from one
This USB Autoguider is compatible with all mounts having standard ST4 autoguider port. Here is a list of some In addition to the Autoguider Interface itself you will need these accessories too: Telescope mount that The autoguider uses Meade LX200 commands, so you should choose LX200 as telescope type. Start the
Annons
Visa toppen
Show footer