3 going to light black going to red on motion all naturals together red on common screw of 3 way and hot on same side other screw
An outdoor motion detector light can save electricity and scare off intruders. But if passing cars or the neighbor's dog constantly triggers the light, you don't get either benefit. To stop unwanted “trips," you have to limit the “detection zone," the area where the sensor can see moving objects. First, aim the detector. Turn the
INSTRUCTION GUIDE. Motion-Activated Security Light HS3620. Congratulations on a wise purchase! ENCLOSED YOU WILL FIND: • Security Light Control. • Wireless Motion Sensor. • Wireless Remote Control. • Screws. • One 12-volt alkaline battery (installed). TOOLS NEEDED: • Phillips screwdriver. BATTERIES
OPERATING INSTRUCTIONS to-dawn sensor. The dusk-to-dawn sensor disables the motion detector during daylight hours and only allows the motion sensor to activate the light after dark. The security light will not activate during daylight hours regardless of whether it sees motion or not. 1. The slide switch on the bottom
DUALBRITE® Timer. Light comes on half bright for selected time after dusk. (Off, 3 hr., 6 hr., until dawn). Selecting OFF disables this feature. The motion sensing features will continue to work as described in this manual. If motion is sensed, the light turns on full bright for the ON-TIME (1, 5, or. 20 minutes) then returns to dim
SIX HOUR TIMER FUNCTION – At dusk the light will automatically turn on. After six hours the light will turn off and the motion detector will activate. The motion sensor will remain active throughout the night and deactivate at dawn. 5. MANUAL OVERRIDE – The user may manually turn on the light from inside his home using
30 Jul 2010

Annons

The photo has no tags

February 2018