read?file=grease+seatpost+clamp+instructions << (Read Online)

how to install saddle on seatpost

install seatpost clamp

salsa post lock

surly seatpost

salsa lip lock

how to attach a bike seat to a post

seatpost clamp orientation

seatpost clamp torque

Apply a thin layer of grease to the top and inside of your seat tube. 2. Slide the collar onto your frame. The slot in the collar should be over the slot in the seat tube of your frame, and the inner lip of the collar should sit flush on top of the seat tube.
Installation- Saddle with Standard Rails. Loosen the bolt with a 5mm allen wrench and remove the standard rail wedges; Lightly grease the threads for the wedge bolt; Lightly grease the sliding edge of the wedge; Install the bolt into the appropriate wedge half; Remove the lower cradle of the seatpost clamp; Slide the saddle
Please read the following instructions. If you have TECH TIP: Specialized recommends the application of carbon assembly compound (or carbon paste) between the seat tube and the seatpost to With proper preparation of the frame, clamp and seatpost, it is not necessary to apply more than the recommended torque.

Using the a seatpost with the wrong size of saddle rail clamp could cause the saddle to break or come loose unexpectedly. If you are Adjust the lever tension, and make sure it is in the closed position, by following the Quick-release adjustment instructions. Wipe any old grease off the seatpost, and clean if necessary. 3.
Apply a thin layer of grease to the top of your seat tube. 2. Slide the collar onto your frame. The slot in the collar should be over the slot in the seat tube of your frame, and the inner lip of the collar should sit flush on top of the seat tube.
2 Jun 2017 Consider investing in a decent torque wrench set with the appropriate torx and Allen sockets; 10Nm isn't much, and 5Nm is even less, which is often now the recommended torque range for seatpost, steerer and bar clamps. Always grease the threads and base of the bolts ?rst, including both sides of the
Installation. Verify that the frame specification and seatpost diameter is correct. Installing a seatpost with an incorrect diameter will result in damage of the seatpost and frame. Ensure the seat tube is clean and free of any burrs or sharp edges. Apply a light layer of grease to both clamp bolt threads. DO NOT grease the
PDF tech note. Carbon Seat Posts. Please read these important safety instructions for the use of any carbon fiber seat post installed on Cannondale bicycles. Please Before installing the seat post, only lightly grease the inside surface of the binder Always properly torque saddle to seat post clamp bolts. Too much torque
Please read the following instructions. If you have any doubt of a different style seat collar can damage the seatpost resulting in failure, causing serious personal injury or death. TECH TIP: Specialized recommends the application of carbon assembly compound (or carbon paste) between the seat tube and the seatpost

Annons

The photo has no tags

February 2018