13518. FLOW AND ENERGY MEASUREMENT
8 Apr 2011 APR 2011. PREFACE i. DANIEL MEASUREMENT AND CONTROL, INC. SERIES 500 LIQUID TURBINE FLOW METER. INSTALLATION, OPERATING AND. MAINTENANCE INSTRUCTIONS. NOTICE. THE CONTENTS OF THIS PUBLICATION ARE PRESENTED FOR INFORMATIONAL PURPOSES ONLY,
10 Oct 2013 This manual is designed to assist in the installation and operation of the Daniel™ Series 1500. Turbine Meter. To assure proper installation and startup it is important to read this manual in its entirety. 1.2. Description. The Series 1500 Turbine Flowmeter is a volumetric flow metering and transmitting device
upstream of the meter. But, a partially open valve upstream of the meter will require 25X the piping diameter, and multiple disruptions, such as a spiral or consecutive elbows, can require 50x the piping diameter. In general, downstream straight run requirements for turbine flow meters are around 5-10x the piping diameter.
9 Oct 2014 How do I install a liquid turbine meter? See the installation drawing in the NUFLO Liquid Turbine Flow Meter installation guide. Make sure there are at least 10 pipe diameters of straight pipe upstream of the meter and five pipe diameters of straight pipe downstream of the meter. The pipe must be the size of
Turbine flow meters are designed with wear resistant internal components to provide trouble-free operation and a long service life. Fluid entering the flow meter is first conditioned by the inlet flow straightener which reduces turbulence in the fluid. The moving fluid causes the rotor to spin at a speed that is proportional.
INSTALLATION INSTRUCTIONS. Prior to installation, the flow meter should be checked internally for foreign material and to ensure the turbine rotor spins freely. Fluid lines should also be checked and cleared of all debris. The flow meter must be installed with the flow arrow, etched on the exterior of the meter body, pointing
1 Feb 2010 Environmental Management Group. Technical Requirements. Water Initiatives. Technical Specifications and. Installation Requirements for Flow. Meters. Prepared by: Kelvin Ferguson, Manager – Water Information Services. Approved by: Bruce Corbett, Group Manager – Water Initiatives. February 2010.

Annons

The photo has no tags

March 2018