February
Sunday 25 February 2018 photo 3/15
|
Pac1 series 2 manual: >> http://wmf.cloudz.pw/download?file=pac1+series+2+manual << (Download)
Pac1 series 2 manual: >> http://wmf.cloudz.pw/read?file=pac1+series+2+manual << (Read Online)
nidac australia
nidac ct1 series 3 manual
presco access control
nidac vr43
pac 1 install manual
nidac ct1 manual
nidac pac1 series 3
pac 2 door controller manual
2. CHANGES FROM SERIES 2. 1. The PAC1 now supports 600 user codes. 2. Egress input can now be programmed as edge triggered. (momentary only) so that keeping the Egress input triggered will not keep the door open permanently. 3. User code programming has been simplified (refer to the supplied User Code
“Series 2". Mullion Style. Indoor Proximity. Reader. Installation Manual. 4th Edition. ™. 2. PROTECTION. The NIDAC Presco™ system has a high immunity to all . 1. Put the PAC1 into program mode using the management code or button on the PAC1. 2. Open the memory location in which the Prox card is to be stored.
Enter the Master Code or press the program button on the PAC1 door controller to enter the system into program mode. Step 2. Press the Star Key, then enter a 3-digit location number (000 – 399). Step 3. Enter the code type for door,. 1 = momentary, 2 = toggle, 0 = disable. Step 4. Press Enter. Step 5. Enter a 3-7 digit user
Presco™ PAC-1 Single Door Access Controller. Presco™ access control is designed for maximising security using a split system allowing the PAC door controllers to do the code processing in remote protected areas. Using the latest microprocessing technology the PAC controllers operate most electric door locking
Procedure to program or change user codes — Presco Keypad PRE-series. To create a new Master/Management Code—locate the PAC1. Control box and push the Program Button. Red LED light will appear on the box. “The system is now in program mode." Write Down New or Existing Master/Management Code:.
Revision 2. KC2 Series 1 Instructions.doc 7/09/09. 3. SPECIFICATIONS. Input Voltage: 10-15V D.C.. Input Current: 15mA + 35mA per relay when operated. OU1 & DUR contacts: 30V, 1A SPDT relays. Max. KC2/Keypad separation: 1Km (max. return resistance 100?. Non shielded). Dimensions: 88mm x 69mm x 25mm.
PAC1. “Series 3". USER CODE. PROGRAMMING MANUAL 2. Enter the Management Code (refer to page 3 for more information). Note that the LED on the PAC1 will not light up when the Management Code is used. The PAC1 will automatically exit program mode once a successful or unsuccessful programming
IMPORTANT DIFFERENCES FROM SERIES 1. 1. A PACDL data logger revision 4.0 or higher attached to the DLOG terminal is able to program all features (i.e. times, relay type, etc.) and codes (including the management code) on the PAC1 series 2. 2. When using a PACDL revision 4.0 or higher with a PAC1. Series 2 it is
DT1 SERIES 2 DIALLER. INSTRUCTION MANUAL. PAC1 SERIES 3. INSTALLATION MANUAL · USER CODE PROGRAMMING MANUAL PAC1 SERIES 2. INSTALLATION MANUAL (INCLUDING USER CODE PROGRAMMING). PAC2 SERIES 2. INSTALLATION MANUAL (INCLUDING USER CODE PROGRAMMING)
PAC1 Door Access. Controller. Manufactured by: Nidac Security P/L. 2 Cromwell Street, Burwood, Vic 3125 Australia ph + 61 3 9808 6244 fx + 61 3 9808 9335 www.nidac.com email: sales@nidac.com. Distributed By: PAC2 Door Access. Controllers. The Presco system is built around the PAC series of door access
Annons
Visa toppen
Show footer