Warranty information please call 310-762-9944. Smittybilt,400West Artesia
Installation Manual. 5MITTYEILT. WWW.SMITTYBILT.COM. Part Number: 97.495 XRC 9,500 LBS WINCH. 161.28:1. Sliding Ring Gear. Automatic In The Drum. Drum Size: Diameter 2.5"(63.5mm). Waterproof: IP67 Rating. Fairlead. 4-Way Roller. 72 (1.83m). Textured Black. 77Lbs (35Kgs). (LX W x H) 20.80"x63"x78".
crews on the motor side of the base as shown in Figure 4. • Torque the mounting bolts to 16 N-m (12 lb-ft). • Remove bottom tie bolt. This bolt should be retained for winch service. • Attach the clevis hook to the wire rope. • Put clutch in freespool position. • Manually feed cable loop through fairlead. • Attach hook to cable loop
8 Apr 2016
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220. Page 3 of 33. Installation Manual. Warning: The use of any other accessory or attachment other than those recommended in the Fitting Instructions may present a risk of personal injury. WINCH OPERATION WARNINGS. Read the following carefully before attempting to
Installation Instructions. X2O Winches. SAFETY PRECAUTIONS. SAFETY PRECAUTIONS. Warning! Observe safety precautions for personal safety and the safety of . INSTALLATION. INSTALLATION. Mounting your winch. 1. The winch is to be mounted into a suitable steel mounting frame using the 4 point foot mounting
XRC WINCH. INSTRUCTION MANUAL. IIIJNTIENTS. 0 Safety Precautions. 0 Warnings. - Installation. ' Operation . Maintenance. ' Specifications . Parts List 4. Don't Dverwork the winch: — if the motor becomes uncomfortably hot to touch. stop and tet it cool for a few minutes,. — Don't maintain power to the winch if the

Annons

The photo has no tags

March 2018