read?file=surface+guard+stone+grout+tile+sealer+instructions Apply
If a residue is visible on the surface after drying, remove it with a sponge or white polishing pad 60 minutes after application. Porous tile, such as clay and Saltillo pavers, can be stained by grout during installation. Sealing the tile before grouting will make grout removal much easier.
4 May 2013
Tile industry experts recommend testing sealed surfaces every two years. Apply a few drops of water on the surface. If it soaks in, a coat of SurfaceGard will be necessary to keep sealer at peak As a sealer or grout release for all stone surfaces, unglazed tile if surface is completely sealed after 2 hours by applying.
27 Apr 2016
6 Dec 2011 Allow SurfaceGard to penetrate for five minutes, then wipe up the excess to prevent streaking. Hard surfaces such as polished stone or tile normally need only one coat; but grout, porous stone such as travertine, and unglazed clay tile will need two coats.
The TileLab SurfaceGard 24 oz. Sealer is a penetrating sealer that repels dirt, oil and stains and resists mildew and mold. The sealer is great for use on stone, grout, porcelain, concrete and tile. It emits virtually no toxic fumes. For use on stone, grout, porcelain, concrete and tile; Penetrating sealer repels dirt, oil and stains
If a residue is visible on the surface after drying, remove it with a sponge or white polishing pad 60 minutes after application. Porous tile, such as clay and Saltillo pavers, can be stained by grout during installation. Sealing the tile before grouting will make grout removal much easier.
Scotchgard™ Tile & Grout Penetrating Sealer differs from Scotchgard™ Stone Floor Protector in several ways, including that it: ? Is an impregnator, intended to penetrate the surface with any excess wiped from the surface. ? Does not densify porous Allow surface to cure per manufacturer's instructions. ? Surface should be

Annons

The photo has no tags

March 2018