read?file=twp+1500+application+instructions << (Read Online)

Buy a little more stain than you need just to be sure you do not run out at the end of the project. Prior to using TWP 1500 Deck Stain, clean the wood using a brush or pressure washer along with a quality wood cleaner. Preparing the wood properly will ensure your new TWP Wood Stain will perform optimally.
Buy a little more stain than you need just to be sure you do not run out at the end of the project. Prior to using TWP 1500 Deck Stain, clean the wood using a brush or pressure washer along with a quality wood cleaner. Preparing the wood properly will ensure your new TWP Wood Stain will perform optimally.
Best Way to Apply TWP 100 and 1500 Series Wood Decking Stains. It is best to first measure the wood surface of your staining project. Do not forget to include steps, railings and spindles if you are staining a deck and double the footage of a fence if staining both sides. On average TWP covers approximately 150-300 sq. ft.
When applying TWP Wood Stains for the first time to new wood there will need to be proper steps taken. New smooth wood or decking is not ready to be pre-stained prior to installation or stained right after installation. It is best to follow the directions of the stain manufacturer when it comes to applying a coating to new wood
Prior to using TWP 1500 Deck Stain, clean the wood using a brush or pressure washer along with a quality wood cleaner. Preparing the wood properly will ensure your new TWP Wood Stain will perform optimally. Once the wood surface is cleaned it must dry for a minimum of 48 hours before ant stain can be applied.
The user-friendly formula is easy to apply and maintain but care should be taken when considering when to apply the stain. Weather can be a It should not rain within 12 hours of applying TWP stain to any exterior wood surface. A quick light rain will most . Instructions said wipe off excess with dry cloth. Had to wipe down
OLD WOOD: Rinse surface with 3:1 mix of water and household bleach to remove mildew; use wood bleach to brighten wood and follow with 1500 p.s.i. power washer to remove dead surface fiber. Allow a minimum of 48 hours of good drying conditions before applying TWP® 100. PRESSURE TREATED WOOD: Allow at
TWP 1500 STAIN SURFACE PREPARATION: NEW WOOD: New wood should be allowed 4 to 12 months of natural weathering before finish coat application. After aging, wood should be cleaned with a solution of 1 part household bleach to 1 part water. The bleached surface should be thoroughly rinsed with water, power
TWP 200 STAIN APPLICATION INSTRUCTIONS: SURFACE PREPARATION: This product Allow a minimum of 48 hours of good drying conditions before applying TWP® 200. OLD WOOD: Prior to cleaning POWER WASHING: Standard power washers generating 1500-2500 psi are adequate. The size is somewhat
Unfortunately not all wood is in the same condition prior to applying the stain. We are here to help with your project! Please answer these few questions to achieve the best possible results with your TWP 1500 Wood and Decking Stain. info button Age of wood? Type of wood? Condition of the wood? Has it been stained

Annons

The photo has no tags

January 2025