ARUA-10), but in this. HOWTO the chosen tools are: • Skype [1] for the audio transfer between a local PC and the remote radio. • TeamViewer [2] for remote control of the ARCP-590 program [3]. Familiarity with the TS-590S Instruction Manual
The TS-590S transceiver can also be controlled with the KENWOOD NETWORK COMMAND SYSTEM via a network. For the TS-590SG, please use . Select "ARCP-590" in "Uninstall a program" in the Control Panel and follow the instructions that appear on the display to uninstall the software. Or double-click "Setup.exe",
ARCP-590G Version 1.03, Last updated : November 17, 2016 A virtual COM port driver needs to be installed onto the PC to use the ARCP-590G with a USB cable. Execute the "Setup.exe" in the folder labeled "ARCP590G_103", and follow the instructions that appear on the display to install ARCP-590G. Note:
ARUA-10 is the software required to connect a TS-590S transceiver and a PC by a USB cable and make it possible to use a speaker and a microphone on your PC instead of those on the transceiver. Used in conjunction with ARCP-590, it is then possible to operate the transceiver from the PC. The ARUA-10 will not operate
(Free), January 2015. PC CONTROL COMMAND REFERENCE FOR THE TS-990S TRANSCEIVER (PDF:703KB), May 2015. TS-990S IN-DEPTH MANUAL (PDF:20.0MB), November 2013. TS-590SG, Firmware Updating Program TS-590G Update Version 1.04 (Free), November 2016. Radio Control Program ARCP-590G
ARCP-590 has all the functions of the earlier ARCP-480 program as well as the new features of the TS-590 radio. Six new ways to change frequency using the program have been added, as described in the TS-590 In-Depth Manual. Also, at the bottom of the window a status bar displays frequently used items, including the
To really unlock the potential of this rig Kenwood provides a free program called ARCP-590 that provides you with the ability to control every aspect of the radio with your . Kenwood must have known there would be issues about this because they actually address this in the "Troubleshooting" section of the 590S manual.
15 Oct 2010 This user guide is for the TS-590S. Using the TS-590S and KENWOOD NETWORK COMMAND SYSTEM (hereinafter called. "KNS") enables transceiver operations by remote control using a domestic LAN or the internet. (See Note.) KNS is a system configured using PCs, network environments, ARCP-590
Characters are shown in a dedicated window on ARCP-590G. New 590SG owners are urged to first study the operator's manual. Here is KC5YR's suggested TS-590SG menu configuration if handling virtual tx audio via the USB cable: Other default settings as per pages 15 – 19 of the instruction manual except as noted

Annons

The photo has no tags

March 2018