read?file=self+closing+hinges+instructions << (Read Online)

16 Sep 2015
17 Aug 2015
Once the screw is removed, insert the hex wrench into one of the three tension adjustment guide holes on the round spacer near the Tension Locking Screw and rotate toward the hinge yoke until the desired threaded hole is inline with the opening on the hinge body.
15 May 2010 Outside doors should close completely whether or not users provide enough force to ensure that. Other doors, such as public restroom stall doors, are left to be slightly open unless latched. Stanley spring hinges provide tension adjustments to hold doors at any desired angle. A spring hinge has a hex screw

11 Oct 2013 Hello rcjr and welcome to the community! Here the instructions to adjust the self-closing hinges. spring loaded hinge instructions.PNG. Font Size Font Family Font Format Hello rcjr and welcome to the community! Here the instructions to adjust the self-closing hinges. spring loaded hinge instructions.
Rotate Hex wrench clockwise(while viewing from the adjustment end of hinge) to increase tension(Figure #2), and insert locking pin loosely in adjusting hole. 5. Release Hex wrench until locking pin contacts side of adjusting hole.
5 Oct 2016
Adjust spring hinges that do not feature a hex opening by using a tension lever, which should come with the hinges. With the door closed, insert the tension lever in the far right hole on the top of the hinge. Pull the lever to the left to expose the first locking hole, then insert a locking pin into the hole.
Hinge Installation: Install Hinge in normal manner with tension adjustment up as shown. ( D ) Release Tension Lever until Tension Pin contacts the right hand side of the Adjustment Slot. achieved, repeat steps A to E until closing force is satisfactory. 3. When the hinges have been adjusted to close the door properly, drive

Annons

The photo has no tags

March 2018