February
Friday 30 March 2018 photo 6/15
|
Afci installation instructions: >> http://kfq.cloudz.pw/download?file=afci+installation+instructions << (Download)
Afci installation instructions: >> http://kfq.cloudz.pw/read?file=afci+installation+instructions << (Read Online)
INSTALLATION INSTRUCTIONS. See Figure 1. 1. Turn “OFF" and lock out the power to the equipment in which the AFCI is to be installed. 2. Move the handle of the breaker (A) to the “OFF" position. 3. Engage the back of the AFCI with the mounting tabs in the panelboard. Push down firmly on the front end to engage the line
INSTALLING CIRCUIT BREAKER BRANCH/FEEDER. 120/240 2-POLE COMMON TRIP ARC FAULT. CIRCUIT INTERRUPTER (AFCI). What is an Arc Fault Breaker? It is a new type of circuit breaker with additional circuit protection, which mitigates the effects of an arcing fault. READ ALL INSTRUCTIONS BEFORE USING.
Should you install it? Installing an AFCI/GFCI receptacle can be more complicated than installing a conventional receptacle. Make sure that you: • Understand basic wiring principles .. to obtain performance of any warranty obligation is as follows: (1) Contact Pass & Seymour, Syracuse, New York 13221, for instructions.
17 Jun 2014
JUMP TO STEPS. Turn off the main circuit breaker. Remove the panel cover. Remove the old circuit breaker. Disconnect the white wire. Connect the AFCI breaker. Connect the coiled white wire. Install the AFCI breaker. Put the panel cover on.
placed as the first outlet in the circuit. Sample circuit: Always place Outlet Branch Circuit Type. AFCI in position A. All outlets of the protected branch, including lighting and receptacle oulets must be connected to the load side of the AFCI. LINE. A. AFCI. B. C. LOAD. Service. Panel. RESET. FOLLOW INSTRUCTIONS. TEST.
26 Oct 2010
Install the Arc-Fault Circuit Breaker using the following procedure: 1. Turn off the Arc-Fault Circuit Breaker by moving its handle firmly to the OFF position. 2. Wire the Arc-Fault Circuit Breaker (see connection diagram). A. Connect the coiled white “pigtail" wire from the Arc-. Fault Circuit Breaker to the panel or enclosure.
Install the Arc-Fault Circuit Breaker using the following procedure: 1. Open the Arc-Fault Circuit Breaker by moving its handle firmly to the OFF position. 2. Install the Arc-Fault Circuit Breaker into the load center. (see connection diagram). A. Connect the coiled white “pigtail" wire from the Arc-. Fault Circuit Breaker to the panel
Types of AFCI's. Combination Type AFCI vs AFCI Branch/Feeder. 4. Combination Type AFCI ? AFCI + GFCI. 5. Troubleshooting. LED indicator guide. 6. Troubleshooting circuits. 7. Intelli-Arc set up instructions. 8 -10. Intelli-Arc operating instructions. 11-13 Expand to 1 pole, 15 – 20A circuits installed in family rooms
Annons
Visa toppen
Show footer