Wednesday 14 February 2018 photo 6/14
![]() ![]() ![]() |
Cisco aip ssm command reference manual: >> http://zde.cloudz.pw/download?file=cisco+aip+ssm+command+reference+manual << (Download)
Cisco aip ssm command reference manual: >> http://zde.cloudz.pw/read?file=cisco+aip+ssm+command+reference+manual << (Read Online)
Log in to AIP-SSM. For the procedure, see Logging In to AIP-SSM. 2. Initialize AIP-SSM. Run the setup command to initialize AIP-SSM. For the procedure, see Initializing You can use the show module slot details command to verify that you have initialized AIP-SSM and to verify that you have the correct software version.
31 Mar 2011 Americas Headquarters. Cisco Systems, Inc. 170 West Tasman Drive. San Jose, CA 95134-1706. USA www.cisco.com. Tel: 408 526-4000. 800 553-NETS (6387). Fax: 408 527-0883. Cisco Intrusion Prevention System CLI. Configuration Guide for IPS 7.1. Text Part Number: OL-19892-01
For the procedure, see Logging In to AIP-SSM, page 2-7. 2. Initialize AIP-SSM. Run the setup command to initialize AIP-SSM. For the procedure, see Initializing the Sensor, page 3-2. 3. Verify the AIP-SSM initialization. For the procedure, see Verifying AIP-SSM Initialization, page 14-2. 4. Configure ASA to send IPS traffic to
You configure both the adaptive security appliance and IPS software on AIP SSM. Perform the following tasks to configure the AIP SSM: 1. Log (session) in to the AIP SSM. 2. Initialize the AIP SSM. Run the setup command to initialize the AIP SSM. 3. Verify AIP SSM initialization. 4. (Optional) If you have Cisco Adaptive
4. Run the setup command to initialize the ASA 5500 AIP SSM. 5. Verify initialization for the ASA 5500 AIP SSM. 6. (Optional) If you have Cisco Adaptive Security Appliance Software 7.2.3 or later, configure multiple virtual sensors. 7. Configure the adaptive security appliance to send IPS traffic to the ASA 5500 AIP SSM. 8.
Cisco Intrusion Prevention System Command Reference You use MPF commands to configure the adaptive security appliance to divert traffic to the AIP SSM. . Step 3. Enter the setup command to run the setup utility for initial configuration of the AIP SSM: AIP SSM# setup. You are now ready to configure the AIP SSM for
30 Jan 2014 The term "sensor" is used throughout this guide to refer to all sensor models, unless a procedure refers to a specific appliance or to one of the modules, such as the AIM IPS, AIP SSM, IDSM2, or NME IPS. For an alphabetical list of all IPS commands, refer to Command Reference for Cisco Intrusion
800 553-NETS (6387). Fax: 408 527-0883. Cisco Security Appliance Command Line. Configuration Guide. For the Cisco ASA 5500 Series and Cisco PIX 500 Series SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. .. Sessioning to the AIP SSM and Running Setup 22-4
The AIP SSM supports this command in version 6.0 and later. On the CSC SSM, entering this command resets web services on the hardware module after the password has been reset. You may lose connection to ASDM or be logged out of the hardware module. The CSC SSM supports this command in the most recent
This guide describes the CLI commands for Cisco Intrusion Prevention System (IPS 7.0). It includes a Preface. Related Documents. Note. Means reader take note. Notes contain helpful suggestions or references to material not covered in the manual. Caution .. ASA 5500 AIP SSM-20, ASA 5500 AIP SSM-40, IPS 4240,.
Annons