Sunlight Exposure. CPVC piping must be protected from freezing in all
When you need a dependable hot- and cold-water piping system, specify Charlotte Pipe's full line of CPVC-CTS FLOWGUARD GOLD® pipe and fittings. Our market research indicated that you and your customers require a potable-water system that will provide a lifetime of reliable service. We have responded with a

Installation is a critical step in unlocking the full value of a Corzan CPVC piping system. Handling. Proper care should be exercised when transporting, storing or installing Corzan piping to prevent damage. Miter boxes or other guide devices are strongly recommended for manual operation to ensure square cuts. Burrs
Read and understand all instructions before attempting to install any Spears® CPVC Products. • Wear safety glasses, hard hat, and foot protection. Product Certification. Spears® EverTUFF® CTS CPVC piping systems are certified by NSF International (NSF®) to ASTM D 2846 Specification for Chlorinated Poly.
Use of CPVC Products in Combustible Attic Spaces with. Specific Use Sprinklers 18. Support and Hanger Recommendations for. TFP BlazeMaster Fire Sprinkler Systems . 18. This Installation and Technical Manual refers to pipe produced with either Tyco Fire Products (TFP) BlazeMaster® or
Installation" section. HANGERS AND SUPPORTS. • Horizontal Piping: Hang or strap CPVC systems loose- ly to allow for thermal expansion. Do not use metal straps with sharp edges that might damage the tubing. • Vertical Piping (Risers): Vertical runs (risers) of. FlowGuard Gold® pipe should be supported by pipe.
Step-by-Step Instructions. Cut the pipe. FlowGuard Gold can be cut using ratchet cutters*, wheel cutters or a fine tooth saw. Prepare the pipe and fittings. Apply FlowGuard Gold One-Step Solvent Cement. Assemble the joint. Verify proper installation.

PvC and CPvC. Plastic Pipe and Fittings. This guide describes the basic principles for solvent welding plastic pipe and fittings and gives recommended .. installation. It is important that a good interference fit exists between the pipe and fittings. It is for this reason we recommend that joints being made without a primer be

Annons

The photo has no tags

March 2018