Finish. Ashland Swatch. Ashland. Swatch. Allegheny. Swatch.
Instructions. Basic Flagstone. FIRE PIT KIT. STEP. STEP. STEP. Remove all sod, roots and dirt to a depth of 2 inches inside the circle. For a lawn, mark a 49" diameter circle with marking paint then go to step 2. For a patio, use chalk instead of paint then skip to step 5. Level the soil and remove high spots as best possible.
7 Mar 2013
Ashland flagstone fire pit kit, do-it-yourself kit comes ready to assemble with all the pieces & instructions needed to build your own outdoor fire pit, includes 36 flagstone wall blocks & one 7 gauge heavy duty steel insert, pit kit stands approximately 12"height, 49" od, pit kit is 31", color, dimension, weight & texture may slightly
The allen + roth instructions are as follows: If you're putting the pit in your lawn, mark a 49" diameter circle then go to step 2. Remove all sod, roots and dirt to a depth of 2 inches inside the circle. Level the soil and remove high spots as best possible. Add 1.5"-2" of paver base and level.
This DIY kit comes ready-to-assemble with all the pieces and instructions needed to build your own outdoor fire pit. This simple addition of a great focal point to your landscaping available from www.belgard.com.
Fire Pit Installation Instructions. Step 2: Install first row of block (12 units). Using a center stake, lay out the blocks in a 24" radius from the center stake to the center of the back of each block. Level the blocks from front to back and side to side. Blocks may need to be shifted slightly in order to get a tight fit between all the blocks
The insert's top lip should rest on the inside edge of the fire pit stones. After the adhesive cures, pour gravel rock into the bottom of the fire pit, leveling it as you go. The gravel should reach the bottom of the insert ring. Remove all sod, roots and dirt to a depth of 2 inches inside the circle.

Annons

The photo has no tags

February 2018