OR DEATH THAT MAY RESULT FROM YOUR USE. MANUAL. ENGLISH. ESPANOL. FRANCAIS. SLACKSTAND ratchet or adjust the tension of the slackline on the Slackstand at any time.
claim. 1.4 CARE INSTRUCTIONS: The slackline webbing can be cleaned using lukewarm water and a mild soap if needed. Rinse thoroughly with clean water and allow to dry completely before storing. Do not submerge metal ratchet; clean only with standard machine lubricant. Always rinse slackline webbing with clear.
Jun 23, 2007
BEFORE USING YOUR SLACKLINE PLEASE TAKE THE TIME TO READ YOUR SLACKLINE MANUAL AS IT CONTAINS IMPORTANT SAFETY INFORMATION AND GUIDELINES. IT IS YOUR RESPONSIBILITY TO UNDERSTAND AND AGREE TO ALL GUIDELINES, WARNINGS, CAUTIONS, INSTRUCTIONS, AND
Press upper and lower slackline together and make sure it does not loose the tension. Move the ratchet lever back and forward until desired tension is archived. The spindle within the ratchet needs to turn once around fully at least once to secure the line.
Only one person at a time. • Once tightened, check your anchors at both ends. • Never over-tighten lines or over-stress anchors. • Do not set the Slackline up above 0.5m in height. • Huge tension is created once the line is set up and tightened. • Check equipment before use. • Only use with supplied ratchet. • Use at own risk.
Thread the webbing through the slot in the axle and pull the webbing through the axle until the webbing is taut (i.e., there is no slack in the webbing). Once the webbing is taut through the axle, use one hand to hold both sides of the webbing together. Begin tightening the ratchet.
Sep 19, 2015
Apr 19, 2016 Ratchet tensioning systems are slightly faster to set up, but more limited when it comes to webbing selection. Concepts such as static and tension side anchors are the same at with the primitive system. Common ratchet slackline systems require you to build the system by girth hitching both the ratchet side

Annons

The photo has no tags

March 2018