February
Wednesday 14 March 2018 photo 30/30
|
Cetol natural teak instructions: >> http://sso.cloudz.pw/download?file=cetol+natural+teak+instructions << (Download)
Cetol natural teak instructions: >> http://sso.cloudz.pw/read?file=cetol+natural+teak+instructions << (Read Online)
Cetol® Marine Natural Teak with Next Wave™ UV-absorbing technology is a durable translucent protective wood finish for use above the waterline on interior and exterior woods.
17 Jan 2007 Hi all, I've noticed that sikkens has put out a new product called, 'cetol marine natural teak." Just wanted to know if anyone has tried it yet. Specifically I'm wondering if this new product has gotten rid of the traditional orangeyness of cetol. Thanks, Brahm.
APPLICATION PROCEDURE: Follow preparation procedures. Apply one coat of Interlux Sikkens Cetol Marine Natural Teak Finish. Wait 24 hours. Apply second coat of Interlux Sikkens Cetol Marine Natural Teak Finish. Wait 24 hours. Apply third coat of Interlux Sikkens Cetol Marine Natural Teak Finish.
8 Nov 2015 I have used Cetol on the bit of teak we have on outside of our boat. It has lasted well and I'm Regarding Cetol, the application instructions specifically state DO NOT THIN. If you want to experiment I used two coats of Cetol natural teak followed by two coats of Cetol Clear gloss. It really allows the wood
Sikkens Cetol Marine Natural Teak is a durable satin, translucent protective wood finish for use above the waterline on interior and exterior woods. Cetol Marine Natural Teak provides a flexible breathable finish along with weather protection for teak and other hard woods.
21 Mar 2012
Cetol Marine Gloss should be sanded to a dull finish using 220-320 grit sandpaper. Remove all dust before applying the maintenance coat of Cetol Marine, Cetol Marine Light, Cetol Marine Natural Teak or Cetol Marine Gloss. Apply a coat of Cetol as visually required.
How should I apply and maintain Cetol Marine? If Cetol Marine has not been used before: 1. Follow the directions for surface preparation from the label/ product datasheet 2. Apply a minimum of 3 coats of Cetol Marine using a long-haired natural bristle brush 3. Do not use a foam-type brush 4. Apply these 3 coats within a
25 Jun 2014 bristle brush, smoothly, in the direction of the grain. Keep a wet edge to prevent lap marks and thoroughly saturate end grains where possible. Apply 3 coats of Cetol® Marine Natural Teak. Always allow 24 hours drying time in between coats.
Annons
Visa toppen
Show footer